Welcome, %1$s. Please login or register.

Login with username, password and session length
 

Author Topic: Howdy  (Read 1617 times)

Offline Adnoh_777

  • Ensign
  • *
  • Posts: 7
Howdy
« on: September 05, 2013, 07:07:21 pm »
Hello,
I was watching a you tube video of the Polaris 350 Enterprise Refit and the thanks went to this forum.
I joined to try and learn the new methods to build models.
I haven't built a model in over 30 years.
Last Christmas my wife got me the Fine Molds 1/72 millennium falcon and I want to learn the new techniques before I mess it up.
SO I was wanting to know if there are some you tube videos that can show an old dog some new tricks.

I have several small models to learn on.
Thanks
Tim

dlots1701a

  • Guest
Re: Howdy
« Reply #1 on: September 05, 2013, 07:57:00 pm »
First off Welcome Tim to the SFMA and there are tons of videos on building and techniques as well as the forum here is full of friendly folk who will be glad to answer any question you have

Offline Tankton

  • Admiral
  • *****
  • Posts: 2174
    • Cameron's Decals and Such
Re: Howdy
« Reply #2 on: September 05, 2013, 07:58:56 pm »
Welcome Aboard. This forum is full of knowledge tricks and tips.
And also a large group of friendly people. Ask away some one here
will be glad to help.
Live Long and Prosper

Cameron Lewis Sr.

www.cameronsdecals.com

Offline Spencer

  • Radio Astronomer
  • Admiral
  • *****
  • Posts: 789
  • "Well ... let's play this out logically then ..."
Re: Howdy
« Reply #3 on: September 05, 2013, 08:44:39 pm »
Welcome Tim!

This is a great place to be. Feel free to ask any questions you might have and someone will help you out ...

I've been wanting one of the 1/72 Falcons for a while now, but you can't find them for a decent price now!
My fledgling blog and YouTube page:
https://spencersscifimodels.blogspot.com/
http://youtube.com/c/SpencerWolfe

"It pays to keep an open mind, but not so open your brains fall out."
- Dr. Carl Sagan

Offline Adnoh_777

  • Ensign
  • *
  • Posts: 7
Re: Howdy
« Reply #4 on: September 05, 2013, 09:01:27 pm »
My wife got mine from
Free Time Hobbies in Georgia
Here is a link to there site
http://www.freetimehobbies.com/FNMSW06/

She said they were the cheapest price she could find.

Offline wolf 359

  • Admiral
  • *****
  • Posts: 1905
Re: Howdy
« Reply #5 on: September 06, 2013, 09:26:52 am »
Welcome, glad you joined us here.

Offline AnythingSciFi

  • Admiral
  • *****
  • Posts: 2631
Re: Howdy
« Reply #6 on: September 06, 2013, 09:39:21 am »
Welcome to the board!

A 1/72 Falcon huh?
Stop showing off Mr "I got a Fine Molds Falcon" and sit down!!!!
Start building it so you can show us the pictures!!! :)  Just kidding ya!!!

You think your wife would buy me a FM Falcon?
I was dishes!
Ok, I was seen in the kitchen before walking by the sink!!! :)

Offline dirkpitt289

  • Captain
  • ****
  • Posts: 338
    • My Youtube Channel
Re: Howdy
« Reply #7 on: September 06, 2013, 10:12:30 pm »
Welcome to the forum.  8)

Offline Adnoh_777

  • Ensign
  • *
  • Posts: 7
Re: Howdy
« Reply #8 on: September 07, 2013, 08:32:59 am »
OK,
Here is a picture of the models I currently have.
The plan is to build the Stearman Biplane and the Curtis P40 to get used to the glue again, trying not to make a big mess.
I also will be using these two kits as my first airbrush kits.
I want to build the Apollo 27 kit and use LEDs to light it.
I will probably build a few other kits to get more experience before I tacke the 1/72 falcon.
I really don't want to mess it up.

Any suggestions on the glue. thickin a tube, medium, thin, ca????
What is a good entry level airbrush, I think I want a dual action one.

dlots1701a

  • Guest
Re: Howdy
« Reply #9 on: September 07, 2013, 09:57:15 am »
glue i use MEK but you can use glues such as testors,Tenax,ambroid, etc super glue thick, medium, and thin i use zap a gap, a good starter airbrush to me i use Paasche single action but double action is better. just to let you know i would sk the same question in our general discusion part of the forum might serve you better.

Offline TrekWorks

  • Admin
  • Admiral
  • *****
  • Posts: 1695
    • TrekWorks
Re: Howdy
« Reply #10 on: September 23, 2013, 06:53:46 pm »
Welcome to SFMA Adnoh_777, enjoy or forums. You have some great kit's there. Looking forward to watching the buildup's :)
If It's a model kit, I like it already.

 




Enterprise © Bloc